HKPRO Forums banner

1 - 3 of 3 Posts

·
Premium Member
Joined
·
419 Posts
Discussion Starter #1
Recently acquired a FMP/ CIA built G3 semi clone; the model with the muzzle break. Dremmeled down the area with the blind pin and removed the pin. Muzzle break still will not turn, any suggestions?
 

·
HKPRO PRIME MINISTER
Joined
·
1,293 Posts
CIA G-3 Muzzle Break Removal...

Hey Sturm,

Grind down to find the blind pin... Smack it a few times so it's loose...

You need to add butane heat to the muzzle break at the moment of twisting off... I did 14 of these mods for factory G-3 muzzle breaks... The Centurion 99, SAR-8's and Hesse guns all used these breaks...

You need to melt / liquify the soder and twist the break off in seconds...

They used silver soder around the threads to secure the muzzle break... You need to add extreme heat to the break and twist off with a heavy duty iron rod inside thru the muzzle break holes...

Use your leverage and twist hard with your body weight... It will turn...
 
1 - 3 of 3 Posts
Top