HKPRO Forums banner
1 - 20 of 33 Posts

·
Vendor
Joined
·
38 Posts
Discussion Starter · #1 · (Edited)
Please scroll down to see previous ads...

LSC HK94-MP5 receiver flat. This is the most in-spec MP5-HK94 flat available and thus the easiest flat to fold and build. Bold, crisp stampings produce a finished receiver that is hard to tell from the original German.

Most quality HK builders won't build on a non-LSC MP5 receiver flat. This is the only quality flat to ever be stamped in the USA. This is the clear choice for a quality MP5 style build.

Along with LSC's commitment to excellence came necessary increased expense. To keep tolerances perfect, LSC had to service their tooling faster than expected. This increased their per flat costs resulting in a slight price increase. Please note that as usual we are keeping our prices as low as possible.

LSC MP5 RECEIVER FLAT, $199.99
LSC MP5 RECEIVER FLAT


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
38 Posts
Discussion Starter · #2 ·
High quality, light weight rail system for your MP5K, SP5K, SP89, MP5K-RS or clone. This rail system replaces the original handguard and provides a superior mounting option for your lasers, grips, tactical light or any other accessory based on the Picatinny rail.

FAB DEFENSE MP5K ALUMINUM RAIL SYSTEM, $182.70
MP5K SP5K ALUMINUM RAIL SYSTEM, FAB DEFENSE


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
38 Posts
Discussion Starter · #3 ·
I tried this out in the shop the other day and really liked the setup on one of our MP5s. For such a lightweight and minimalist setup, the brace was actually quite comfortable. The Knights Armament rail is functional, comfortable, and solid, as you would expect from KAC. Didn't hurt that it looked great too.

JMAC CUSTOMS RSA-MP5 M1913 PICATINNY BACK PLATE, $89.95
RSA-MP5 M1913 PICATINNY BACK PLATE, JMAC CUSTOMS

SB TACTICAL FS1913 FOLDING PICATINNY BRACE, $199.99
FS1913 FOLDING BRACE FOR PICATINNY, SB-TACTICAL

KAC HK MP5 SP5 RAS HANDGUARD, $344.47
KAC HK MP5 SP5 RAS HANDGUARD



Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]



 

·
Vendor
Joined
·
38 Posts
Discussion Starter · #4 ·
This is the collapsible MP5 brace that everyone has been waiting for. We're excited to have these in stock for you right now, from SB Tactical.


HK PDW COLLAPSIBLE 3-POSITION BRACE, MP5 SP5 HK53 - SB-TACTICAL, $263.99
HK PDW COLLAPSIBLE 3-POSITION BRACE FOR MP5 SP5 HK53, SB-TACTICAL


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]



 

·
Vendor
Joined
·
38 Posts
Discussion Starter · #5 ·
These are solid and comfortable with a minimalist design. Form and function make these kits a winner on multiple platforms.

MP5K/SP5K/SP89 FOLDING ARM BAR AND TAILHOOK MOD1 COMBO, $239.95
MP5K SP5K FOLDING ARM BAR AND TAILHOOK MOD1 COMBO


GEAR HEAD WORKS MP5K SP5K FOLDING ARM FOR TAILHOOK MOD1, $141.70
GEAR HEAD WORKS MP5K SP5K FOLDING ARM FOR TAILHOOK MOD1


GEAR HEAD WORKS TAILHOOK MOD 1 PISTOL BRACE, $104.95
GEAR HEAD WORKS TAILHOOK MOD 1 PISTOL BRACE


Thanks for looking and happy shooting!
Darwin Nercesian
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
38 Posts
Discussion Starter · #6 ·
MARK 23 SOCOM THREAD PROTECTOR 16X1MM RH, $12.95
MARK 23 SOCOM THREAD PROTECTOR 16X1MM RH


HK USP45 COARSE THREAD PROTECTOR 16X1MM LH, $12.95
HK USP45 COARSE THREAD PROTECTOR 16X1MM LH


HK USP45 THREAD PROTECTOR 16X1MM LH, $12.95
HK USP45 THREAD PROTECTOR 16X1MM LH


HK USP40 THREAD PROTECTOR 14.5X1MM LH, $12.95
HK USP40 THREAD PROTECTOR 14.5X1MM LH


HK USP 9MM THREAD PROTECTOR 13.5X1MM LH, $12.95
HK USP 9MM THREAD PROTECTOR 13.5X1MM LH


Thanks for looking and happy shooting!
Darwin Nercesian
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
38 Posts
Discussion Starter · #7 ·
German Hensoldt Z-24 4x28 optics kit. This was the last and most advanced scope issued for the HK G3. 4 power crystal clear optics with bullet drop compensator to 600 meters and the option of reticle illumination (when used with a crosshair illuminator). This kit includes Hensoldt Z-24 scope, HK claw mount, lens covers and case. Each include a small tool kit or cleaning kit, exact accessories vary from kit to kit. As shown in the last image; the hardshell cases have cracks but are in working condition. The scopes are in excellent condition. This scope will not work on a gun that has a welded top rail. These are the nicest Z24 optics we have seen for many years. Surplus excellent condition and in perfect working order. These kits were obviously taken from unissued guns. The white powder in the images is long-term protective 'stuff' that the Germans put on anything rubbery. If you want a new scope case we have the later style German camo cases in stock. This was an improved version that won't crack like the earlier hardshells, SKU: HKK-1015.

HENSOLDT Z-24 OPTIC KIT, EXCELLENT, $799.99
HENSOLDT Z-24 OPTIC KIT, EXCELLENT


Thanks for looking and happy shooting!
Darwin Nercesian
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]







 

·
Vendor
Joined
·
38 Posts
Discussion Starter · #8 ·
Your eyes do not deceive you! Yes, you are looking at one of the rarest and most limited military production items ever made by HK. 1980's production made for German special forces. I know a lot of German ex-military but none that have ever laid eyes on one of these.

HK21E HK23E TRIPOD, FIELD MOUNT, MODEL 1102, $8,999.00
HK21E HK23E TRIPOD, FIELD MOUNT, MODEL 1102


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]




 

·
Vendor
Joined
·
38 Posts
Discussion Starter · #9 ·
The AC-Unity 30rd & 40rd MP5 magazine is a lightweight, impact resistant and highly reliable magazine for all 9mm HK MP5, SP5, MP5K, SP5K and clones taking standard MP5 magazines. Made of an advanced, German polymer-resin that is light weight and extremely shock resistant. This polymer is exclusive to AC-Unity and gives these mags a huge edge in weight and durability in all weather conditions.

MP5 30RD 9MM MAGAZINE, AC-UNITY, $22.95
MP5 30RD 9MM MAGAZINE, AC-UNITY


MP5 40RD 9MM MAGAZINE, AC-UNITY, $24.95
MP5 40RD 9MM MAGAZINE, AC-UNITY


12-PACK OF AC-UNITY MP5 30RD 9MM MAGS W/ USGI AMMO CAN, $239.00
12-PACK OF AC-UNITY MP5 30RD 9MM MAGS W/ USGI AMMO CAN


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]





 

·
Vendor
Joined
·
38 Posts
Discussion Starter · #10 ·
Genuine German HK G36 30rd magazine. Condition is new and unissued. These came bulk packed from the German army but are otherwise new and have never been loaded with ammunition or inserted into a weapon.

HK G36 30RD MAGAZINE NEW, GERMAN ARMY PRODUCTION, $29.95
HK G36 30RD MAGAZINE NEW, GERMAN ARMY PRODUCTION


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]





 

·
Vendor
Joined
·
38 Posts
Discussion Starter · #11 ·
German army surplus green buttstock complete with recoil and buffer assemblies. This is a complete assembly ready to pin onto your G3 or clone. Great for all HK91, G3 Clones and PTR91's. Will also work great for a CETME or newer C308; but the nylon guide ring on the end of the recoil assembly may need to be sanded down just a tad so it fits into the tighter CETME bolt carrier. HK recoil springs, even surplus conditions, are a huge improvement over CETME springs.

We are listing these as surplus Good. We photographed one of the worst stocks we could find, most are nicer, but consider the image as a worst case scenario. Functionally speaking these were considered battle ready by the German army and will function perfectly for a lifetime of use. Functionally they are better than surplus Good. Cosmetically speaking these will have scratches and finish wear associated with military use. They will not win any beauty contests but will clean up with some TLC or refinishing.

G3 GREEN STOCK AND RECOIL ASSEMBLY COMPLETE, USED, $19.95
G3 GREEN STOCK AND RECOIL ASSEMBLY COMPLETE, USED G


Thanks for looking and happy shooting!
Darwin Nercesian
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]



 

·
Vendor
Joined
·
38 Posts
Discussion Starter · #12 ·
Brand new Midwest Industries M-Lok handguard for your HK SP5K, SP89, MP5K, MP5K PDW or similar clone. Nicest M-Lok option available for the K. Absolute top quality MI production made right here the USA.

MIDWEST INDUSTRIES HK SP89 SP5K MP5K HANDGUARD, M-LOK, $104.95
MI HK SP89 SP5K MP5K HANDGUARD, M-LOK


Thanks for looking and happy shooting!
Darwin Nercesian
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]





 

·
Vendor
Joined
·
38 Posts
Discussion Starter · #13 ·
We found a great deal on new HKG3 wall mounts and we're passing the savings onto you. Original German army production HKG3 wall mount as issued to German forces. This is the complete assembly; just screw it to the wall and you're ready to go. This wall mount securely locks your HK91, G3, PTR91, CETME or clone into place. The mount has rubber contact pads so it won't scratch your finish. These are unissued but will have a scratch or two from storage and shipping. Will work with all Slim line, aluminum or tri-rail handguards. Unmodified these will not work with wide handguards. Can be modified and adapted for use with many other weapon types.

ORIGINAL GERMAN ARMY HK91 G3 WALL MOUNT $99.95
HK91 G3 HK91 WALL MOUNT


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]




 

·
Vendor
Joined
·
38 Posts
Discussion Starter · #14 ·
ORIGINAL HK, MADE IN GERMANY

HK is always quick to increases prices. Between the falling dollar and the hot market our current cost on these mags has increased by $10.00 per unit. We'll always fight to keep our prices as low as possible for you. German HK MP5, SP5, SP5K 30rd curved magazines. These are current production and brand new in original wrap. Stamped Made in Germany.

GERMAN MP5, SP5, SP5K 30RD CURVED MAGAZINE NEW, $89.95
MP5 SP5 SP5K 30RD CURVED MAG NEW, GERMAN


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
38 Posts
Discussion Starter · #15 ·
German G3 20rd steel magazine for your HK91, G3, PTR91, clones, the Cetme or C308. Steel mags are German military production made by HK or Rheinmetall, most are HK. See our website for full grading information.

HK G3 HK91 20RD STEEL MAGAZINE, F-G, $8.95
HK G3 HK91 20RD STEEL MAGAZINE, F-G


HK G3 HK91 20RD STEEL MAGAZINE, VG-EX, $19.95
HK G3 HK91 20RD STEEL MAGAZINE, VG-EX


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]
 

·
Vendor
Joined
·
38 Posts
Discussion Starter · #16 ·
New production HK cheek piece for your fixed stock G3, HK91, PTR91, HK33, HK94, MP5 or HK94. Will work on all HK style fixed stocks that have push pin retainer bushings in the stock. This will give you the proper cheek weld that every sniper needs and will make shooting your scoped HK style rifle a dream come true. The HK cheek piece is well designed and is easy to install. Once installed it can be removed or re-installed in seconds. Best of all this requires no modifications to your stock or rifle. Once removed you can't tell the cheek piece had ever been there. Works on all HK fixed stocks that have push pin holes as shown in picture 7.

HK CHEEK PIECE, $39.95
HK CHEEK PIECE


Thanks for looking and happy shooting!
Darwin Nercesian
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]






 

·
Vendor
Joined
·
38 Posts
Discussion Starter · #17 ·
Expand your capability without increasing weight. The most innovative and modular HK variant handguard on the market, our M-Lok HK forend can be used with all modern and traditional shooting techniques. CNC machined aluminum construction makes for a solid, sturdy component, with U.S. made mounting hardware. Still sleek and lightweight, the original lines of the rifle are retained while still offering all the benefits of modern accessories. Each rail system is supplied with two modular top sections, one Picatinny and one M-Lok.

Compatible with most HK33/HK93 variants, HK G3K and PTR91 variants that use 93 length, or "Carbine" length handguards.
Magpul M-Lok modular mounting system
U.S. made steel mounting hardware
Black anodized 6061 T6 aluminum
3.9 inch rail space forward of front sight
Drop-in, no gunsmithing required
Picatinny and M-Lok forward top rail included
5 to 8 rows of M-Lok for ultimate modularity
Length: 14.1"
Weight: only 9.4 oz

HK93 G3K EXTENDED LENGTH M-LOK HANDGUARD NEW, $82.75
HK93 G3K EXTENDED LENGTH M-LOK HANDGUARD NEW


Thanks for looking and happy shooting!
Darwin Nercesian
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]


 

·
Vendor
Joined
·
38 Posts
Discussion Starter · #18 ·
HK made German army issue vehicle and wall mount. Designed for both HK G3 and HKG36 but works with a large number or weapons systems. These are really cool and have the largest molded HK logos we have seen. Work with all G36 variants as well as the HK G3/91, HK93/33/53, HK MP5. Has adjustable handguard inserts that allow you to securely mount HK wide or slim handguards. Will fit many other weapons systems with a little or no modification.

The buttstock slides into the bottom mount and the handguard locks into the upper throw lever mount. This is a quick release design so you can remove your weapon without delay. Buttstock base has a large and small pocket. Small pocket works with all HK A2 stocks. Larger opening works with G36 and UMP style buttstocks.

Each single vehicle mount kit includes buttstock mount, handguard mount with extension and mounting hardware. Mounting screws are meant to be threaded directly into steel plate. If mounting on wood or drywall you can substitute for other bolts or screws.

HK MULTI WEAPON WALL & VEHICLE MOUNT NEW, $49.95
HK MULTI WEAPON WALL & VEHICLE MOUNT NEW


Thanks for looking and happy shooting!
Darwin Nercesian
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]




 

·
Vendor
Joined
·
38 Posts
Discussion Starter · #19 ·
German HK production winter trigger assembly. Attaches to ambi-navy triggers that have the two cross bars in place. Now you know what those pins are for! Talk about a hard to find HK accessory. Before importing these, I had never seen an HK9X winter trigger before.

Clever spring loaded, quick detach design allows for installation or removal in seconds. Perfect for Uber cold weather mittens or those who have webbed hands.

Condition is brand new, unissued old stock straight out of HK Germany. These have not been in production for many, many years and were never produced in large numbers. Only a few available.

ORIGINAL HK, MADE IN GERMANY

HK PART NUMBER 224631

GERMAN HK WINTER TRIGGER FOR AMBI TRIGGER NEW, $199.95
HK WINTER TRIGGER FOR AMBI TRIGGER NEW, GERMAN


Thanks for looking and happy shooting!
Darwin Nercesian
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]



 

·
Vendor
Joined
·
38 Posts
Discussion Starter · #20 ·
Complete HK 8-weapon vehicle and wall mount assembly. The Germans use these in armored personnel carriers and armories.

These are really cool and have the largest molded HK logos we have seen. Work with all G36 and UMP variants, the HK93/33/53, HK G3/91 and HK MP5. As-is this also works with many other weapons including the Remington M870, Mossberg 500-590 series shotguns and most AK47-AK74. Will fit many other weapons with a little modification.

The buttstock slides into the bottom mounting base and the handguard locks into the upper throw lever mount. This is a quick release design so you can remove your weapon without delay.

Each buttstock base has a large and small pocket. Small pocket works with all HK A2 stocks. Larger opening works with G36 and UMP style buttstocks. Can be easily modified if your desired weapon has a fatter than HK bottom. I had to remove a little plastic for FAL's to fit, then they fit perfectly.

Each handguard mount has adjustable handguard inserts that allow you to securely mount HK wide or slim handguards. Fits most rifle handguards and again, can be easily modified to fit almost anything.

Each 8-weapon kit comes complete and ready to install. Mounting bolts are included, though depending on your mounting needs you may need to purchase different hardware. Great for any American gun room or man cave.

At its widest this is 38.625 inches across but it can be trimmed a couple inches on each side if needed.

NSN (NATO STOCK NUMBER) 2541-12-355-0855

HK 8 WEAPON WALL & VEHICLE MOUNT, $389.95
HK 8 WEAPON WALL & VEHICLE MOUNT


Thanks for looking and happy shooting!
Darwin Nercesian
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: [email protected]






 
1 - 20 of 33 Posts
Top