HKPRO Forums banner
Cancel
Create thread New Forums

G3/MP5 Aimpoint mount offer

Jump to Latest
18K views 55 replies 20 participants last post by  slapshot  
#1 ·
Hi!
My name is Dennis and I'm the CEO and co-founder of Infitech, a small company in Sweden that specializes in developing and producing firearm accessories/upgrades.

We just recently released our Aimpoint Micro mount for the G3/MP5 platform that allows for an absolute co-witness thanks to the low profile and integrated Aimpoint interface which puts the optic completely in-line with the diopter sights, while weighing only 1.6oz (45g)
It also features self-locking claws, eliminating the need for any threadlocking compounds regardless of how many times the mount is fastened/loosened.

The mount retails for around $150 (fluctuates slightly according to the exchange rate between SEK-USD), however to show our appreciation for this community, we are at the moment offering a 15% discount to forum members using the code: hkpro
The code will be valid until 2021-07-22

You can find the mount here: HK G3/MP5 Aimpoint Micro mount

296722
 
#5 ·
The reason for the high shipping cost is that we ship with DHL Express which normally delivers in around 3 business days to US addresses and has full insurance on all packages.

We used to offer a cheaper option via the regular postal service, however we experienced too many issues with packages being lost or taking months to deliver and their insurance did not cover "anything remotely related to firearms".
This and some other smaller reasons caused us to only offer shipping via DHL Express despite the higher cost.

Please note however that the shipping cost stays the same regardless of the order amount, so i would personally recommend going together to order with a few friends and split the shipping cost to make it much lower.
 
#12 · (Edited)
Got the mounts for Micro and ACRO however, neither one fits on any of my factory post sample MP5s. The only gun that it fit is my Zenith imported MKE. The B&T low mount sits nice and flat on the scope tab weldment. But these mounts do not clear the edges of the scope tab to sit flush on tab so the mounts sit at an angle messing with the moa.
 
#13 ·
I am very sorry that you are having this issue, this is the first time I hear about this despite many mounts sold throughout Europe.

We will ofcourse take them back for a full refund, and do whatever we can to track down and solve this issue.
In the mean time, please accept my sincere apologies.
 
#14 ·
The scope tab on the Zenith/MKE is welded to the receiver on the front and back of the tab.
The scope tab on the German MP5 is welded to the receiver on the sides of the tab.

This is why the Infitech mount does not clear the tab on the German MP5 that I have and only fits on the Zenith. The slot on the B&T low mount is cut wide enough to accommodate the weld beads on the side of the tabs so it works on both Zenith and H&K. Should be an easy design revision.
 

Attachments

#15 ·
Thank you for the clarification!

We will do our best to revise this as soon as possible, and until then I have made the items unavailable for order. So you see the mounts as available on our website, that means the issue has been resolved as we will not continue selling them until this is fixed.

Until then, if anyone seeing this has already ordered one and notices the same issue, please do not hesitate to contact me either on HKPro or via email.
 
#23 ·
Nick337 said:
I would love to buy two of them. But would you know if these mounts would be able to fit more than aimpoint red dots? I like having options of mounting more than one red dot from different companies.


Sent from my iPad using Tapatalk
Click to expand...
Have not tried other RDS. Holosun and other companies make RDS with the Micro footprint so I’m guessing they would work too but cannot confirm. Not sure about the mounting screw sizes are different too
 
#26 ·
Indeed it does, decided to give a shot while awaiting for the ACRO P2 to be stocked/sourced. So far liking the Steiner setup and seems pretty comparable to the Acro…….Also keeps the same compact footprint (and absolute co-witness). **Of note the Infitech low profile rounded mount tabs (specifically left front) allows for just enough clearance (minimizing less thumb gouging guessing due to low rounded mount claws) and retains just enough room for slapping bolt fwd if so desired without interference (granted YMMV as I have average size thumbs)

Image
 
#29 · (Edited)
I just stumbled over this thread last saturday.

As I am waiting for my 10266 for almost 8 months now I immediately ordered one for a Micro Aimpoint and for good measure added another mount for the ACRO to my order as well, as I am (desperately) waiting for the release of the SP5K-PDW here in Germany. As one of the OR pistols will get upgraded to a C-2 I guess I now know where that spare C-1 will go, after all.

Well, ordered on the weekend, I recieved an email on monday confirming the order and today the shipment already arrived! That's about a thousand miles in two days - amazing! And even the discount mentioned above was still honored.

Mounted a Micro H-2 to my SP5, fit and finish are amazing and I love the design. The rounded edges are a very nice feature, specially in comparison to the 10266.

The mount offers full cowitness and the sight is directly mounted, which allows the low line of sight.
That means that you can't quick-detach the sight and you will have to mount the gun similar as if using the iron sights.
If the intended use fits those parameter (it does fit mine), I think this is one of or the best mounting option(s) that I am aware of.

(y)

P.S.: Going to the range on the weekend, will try to get some pictures with decent lighting there.
 
HKPRO Forums
posts
2M
members
97K
Since
2000
Actually created in 1999 (the original posts from the first database were lost), we are a forum dedicated to and laser-focused on Heckler & Koch firearms, Heckler & Koch accessories and the owners and enthusiasts that love them! Come join the discussion regarding HK pistols, long arms, NFA arms, HK accessories, HK history and trivia and more.
Full Forum Listing
Explore Our Forums
HK HANDGUN TALK HK CLONE TALK HK LONG GUN TALK HK NFA TALK HK TALK