HKPRO Forums banner
Cancel
Create thread New Forums

Help P30SK slide disassembly horizontal safety block/firing pin roll pin removal

Jump to Latest
3.9K views 9 replies 5 participants last post by  JulianP30LEM  
P
#1 ·
My P30SK has a horizontal pin next to the safety block I can't drive out. I'm installing a GG short reset kit so want to use their firing pin block spring. I've never seen this "extra" pin in other slides, don't want to force anything and can't find any instruction unique to the P30SK slide, just full size models (which don't appear to have this pin). I'd like to take the entire slide apart for cleaning while I'm away it.

Any help would be appreciated.

Thanks!
 
Discussion starter · #3 ·
Just found this:

How To Detail Strip a P30SK Slide

The following tutorial will show you how to detail strip a P30SK slide. It is a little different from the other HK pistols (USP, HK45, P2000/SK, etc.) due to the addition of new Firing Pin Safety in the P30SK (and VP9/VP40). Tools you will need...
www.hkproshop.com www.hkproshop.com

I'll post how I make out thanks
 
Discussion starter · #4 ·
Got it apart but man none of my 1/16" punch's worked without getting wedged in much too tight for my comfort. All's well that ends well and glad I found the above instructions. It's funny, I googled all over on my ipad to no avail, happened to try later on my phone and it was the 1st hit. Go figure.

Can't say I'm overly impressed with the short reset kit. It's a bit shorter than factory but doesn't feel smooth on the way back out and there's a lot of take up after the reset. I'll reach out to Grayguns because their products are top notch.

Thanks Crashmc for responding, much appreciated.
 
Discussion starter · #6 ·
Other HK models don't have what's circled in red. See link in post #3 abov
Image


Here's a link for the disassembly of a standard P30 slide, you'll see it doesn't have a firing pin safety (not to be confused with firing pin block safety).

How to detail strip a P30/P30S/P30L/P30LS (Part 1 of 2)

This 4-part guide will show you how to detail strip a P30-series gun (P30/P30S/P30L/P30LS). Part 1 - Detail Stripping of the Slide Tools you will need: 1. A 3/32 roll-pin punch 2. A set of long, needle-nose pliers 3. A bench block (optional) 4...
www.hkproshop.com www.hkproshop.com

Maybe someone can explain why the P30SK has a firing pin safety in addition to the tradition firing pin block safety?
 
HKPRO Forums
posts
2M
members
97K
Since
2000
Actually created in 1999 (the original posts from the first database were lost), we are a forum dedicated to and laser-focused on Heckler & Koch firearms, Heckler & Koch accessories and the owners and enthusiasts that love them! Come join the discussion regarding HK pistols, long arms, NFA arms, HK accessories, HK history and trivia and more.
Full Forum Listing
Explore Our Forums
HK HANDGUN TALK HK CLONE TALK HK LONG GUN TALK HK NFA TALK HK TALK