Planning on building an hk11A1 from a parts kit. What legality mods are required for a semi build? I searched and apologize if my Neanderthal poo poo brain missed anything already walked through.
mikeanthony6
Yeah I'm a littel confused here. My presumption is the OP is building an HK11 semi host so what letter are you referring to as its a G3 with an interchangeable barrel (for the most part)
I had an 11 clone. It was cool to be able to swap barrels. I fired it several times with a Beta C-mag, but it never ran well in full auto.
It was a very cool piece, though.
It was a very cool piece, though.
Sorry I should clarify, I'm planning on a home build from flats and semi only rifle. Just wanted to know what blocks or mods are required to get it done. It would be the model with no front grip pin and has the swing down replaceable mag well
The first mod I know of on my HK11A1 build from MM was that on the bracket that the grip stick rests on, there's a block welded on and then a slot cut in the grip stick and trigger pack. That way you can't use full auto packs. You'd also need the typical mods for any SEF pack. Those were at least the ones I could easily notice. I'm sure there are more.
Oh I got you now! Didn’t realize you were referring to the other thread of epic cluster-f@@k “can I do this”
I found an old pic that has my 11 clone in it. You can also see the extra barrel in the picture.
![Image]()
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
