HKPRO Forums banner

My obsession at its worst ...

19K views 82 replies 70 participants last post by  RMA  
#1 · (Edited)
I know that I need to seek help, but first I should identify the problem. And here it is.
http://pic19.picturetrail.com/VOL1063/1185607/9084176/226110309.jpg
Image

http://pic19.picturetrail.com/VOL1063/1185607/9084176/226110479.jpg
Image

http://pic19.picturetrail.com/VOL1063/1185607/9084176/226111549.jpg
Image

http://pic19.picturetrail.com/VOL1063/1185607/9084176/226110536.jpg
Image


Here is what I remember how they stood when I took pictures (I did write down the model and serial numbers in order somewhere). Anyway, in the middle is the Jubilee P7M8 of course. On the left, KC nickel set of P7M8, M10 and M13. KC blue set P7M8, M10 and M13 to the right. Then Chantilly P7K3 and Sterling P7K3 on each side followed by one P7M8 and two P7M13s on each side. Two standing up in the back are KH? P7E with flush heel mag release and IA P7 with exposed mag release. Another M13 in the back left and M8 with rosewood grip on the right.
 
#19 ·
So what's the problem?...nice collection.:p
 
#28 ·
Well, I used to have three P7s (PSP) that have the black boxes (same as the one on the left, second from the bottom). The "green box" is actually dark gray and it's for a Chantilly IE P7M13.
I think HK started using black plastic box for P7 PSP/M8 around '86. I have an IF P7M8 that came in a smaller box marked with just "P7" (one of the two on left, the other is for the P7E), but they still used cardboard box in '92 for those P7M10s, go figure. May be they did not want to make another mold for the bigger slides on the M10's.